KTM 6 Pin Connector Cable for Keihin ECUs: A Comprehensive Guide

The KTM 6 Pin Connector Cable For Keihin ECUs is an essential tool for anyone looking to diagnose, tune, or repair their KTM, Husqvarna, or GASGAS off-road motorcycle. This cable allows you to connect your bike’s ECU to diagnostic tools, tuning devices like the Maptuner Nano from CARDIAGTECH.NET, or other equipment to read data, flash new maps, and troubleshoot issues. Without the proper connector cable, accessing the full potential of your bike’s ECU is simply impossible.

1. Understanding the KTM 6 Pin Connector Cable

The KTM 6 pin connector cable is a specialized cable designed to interface with the Keihin ECUs found on many KTM, Husqvarna, and GASGAS off-road motorcycles. These ECUs control various engine functions, including fuel injection, ignition timing, and more. The 6-pin connector provides a standardized way to access this data and make changes to the ECU’s programming.

1.1. Purpose of the KTM 6 Pin Connector Cable

Diagnostics: Read diagnostic trouble codes (DTCs) to identify potential issues with the engine or other systems.
Tuning: Flash new fuel and ignition maps to optimize performance for different riding conditions or modifications.
Data Logging: Record engine data, such as RPM, throttle position, and sensor readings, for analysis and tuning adjustments.
ECU Programming: Update the ECU firmware or modify various parameters to customize engine behavior.
Troubleshooting: Allows mechanics to pinpoint electrical issues and ensure all components are communicating properly

1.2. Compatibility with Keihin ECUs

The 6-pin connector is specifically designed to work with Keihin ECUs, which are commonly found on KTM, Husqvarna, and GASGAS off-road bikes. However, it’s essential to verify compatibility based on the year and model of your motorcycle, as connector types can vary.

1.3. Types of 6 Pin Connectors

White 6 Pin Connector: Typically used on 2016-2022 models and 2024+ off-road bikes.
Red 6 Pin Connector: Primarily used on 2023 off-road models.

Using the correct cable for your specific model year is crucial to avoid damaging the ECU or diagnostic equipment. CARDIAGTECH.NET provides both white and red 6-pin connector cables to ensure compatibility with a wide range of KTM, Husqvarna, and GASGAS motorcycles.

2. Identifying the Correct KTM 6 Pin Connector Cable for Your Motorcycle

Selecting the right KTM 6 pin connector cable is crucial for seamless connectivity and optimal performance. The connector type varies based on the model year and specific ECU of your bike.

2.1. Checking Model Year Compatibility

First and foremost, identify the model year of your motorcycle. As mentioned earlier:

2016-2022 and 2024+ Models: Typically use the white 6 pin connector.
2023 Models: Generally use the red 6 pin connector.

Always double-check your bike’s specifications to confirm the correct connector type.

2.2. Examining Your Bike’s ECU

Visually inspect the connector on your bike’s ECU. Note the color (white or red) and the arrangement of the pins. Compare this to the connector cables available at CARDIAGTECH.NET to ensure a match.

2.3. Consulting Your Motorcycle’s Service Manual

Your motorcycle’s service manual is an invaluable resource for identifying the correct parts and specifications. Refer to the manual for the precise connector type required for your bike’s ECU.

2.4. Seeking Expert Advice

If you’re unsure which connector cable is right for your motorcycle, don’t hesitate to seek expert advice from CARDIAGTECH.NET. Our knowledgeable technicians can help you identify the correct cable based on your bike’s year, model, and ECU type. You can reach us at +1 (641) 206-8880 for immediate assistance.

2.5. Importance of Accurate Identification

Using the wrong connector cable can lead to several issues, including:

Damage to the ECU: Incorrect voltage or pin configuration can fry the ECU, resulting in costly repairs.
Communication Errors: Incompatible cables may not establish a proper connection, leading to data errors or failed programming attempts.
Pin Damage: Forcing the wrong connector can bend or break the pins on the ECU or cable.

Therefore, it is important to ensure compatibility. CARDIAGTECH.NET is dedicated to helping you find the right tools and cables to keep your motorcycle running smoothly.

3. Applications of the KTM 6 Pin Connector Cable

The KTM 6 pin connector cable unlocks a wide array of possibilities for diagnosing, tuning, and optimizing your motorcycle’s performance. Let’s delve into the specific applications and how this cable can enhance your riding experience.

3.1. ECU Mapping and Tuning

ECU mapping and tuning are among the most popular applications of the 6 pin connector cable. By connecting a tuning device, such as the Maptuner Nano from CARDIAGTECH.NET, you can modify the fuel and ignition maps within the ECU. This allows you to:

Optimize for Performance: Fine-tune the engine to deliver maximum power and torque for your specific riding style and conditions.
Adjust for Modifications: Compensate for aftermarket parts, such as exhaust systems or air filters, to ensure optimal engine performance.
Improve Fuel Efficiency: Adjust the fuel map to maximize fuel economy for long-distance rides.
Customize Throttle Response: Modify the throttle map to achieve a more responsive or smoother throttle feel.

According to Dynojet, proper ECU tuning can increase horsepower by 5-10% on a stock motorcycle and even more with aftermarket modifications.

3.2. Diagnostic Troubleshooting

The KTM 6 pin connector cable is invaluable for diagnosing and troubleshooting issues with your motorcycle’s engine and electronic systems. By connecting a diagnostic scan tool, you can:

Read Diagnostic Trouble Codes (DTCs): Identify the specific fault codes stored in the ECU, which can pinpoint the source of the problem.
Clear DTCs: Reset the ECU after repairing the issue to clear the fault codes and turn off the check engine light.
Monitor Sensor Data: View live data from various sensors, such as O2 sensors, throttle position sensors, and temperature sensors, to identify abnormalities or failures.
Perform Component Tests: Activate specific components, such as fuel injectors or ignition coils, to verify their proper function.

With the right diagnostic tools and the KTM 6 pin connector cable, you can quickly and accurately diagnose issues, saving time and money on repairs.

3.3. Data Logging and Analysis

Data logging is a powerful technique for analyzing engine performance and identifying areas for improvement. The KTM 6 pin connector cable, when used with a compatible data logger, allows you to:

Record Engine Parameters: Log a wide range of engine data, such as RPM, throttle position, AFR, and sensor readings, over a period of time.
Analyze Performance: Review the data logs to identify performance bottlenecks, such as lean spots or ignition timing issues.
Optimize Tuning: Use the data to fine-tune the ECU map for optimal performance in specific riding conditions.
Track Engine Health: Monitor engine parameters over time to identify potential problems before they lead to major failures.

Data logging is particularly useful for racers and performance enthusiasts who want to squeeze every last bit of performance out of their motorcycles.

3.4. ECU Flashing and Reprogramming

ECU flashing and reprogramming involve replacing the existing software on the ECU with a new or modified version. This can be done for a variety of reasons, including:

Updating to the Latest Firmware: Install the latest firmware from the manufacturer to fix bugs, improve performance, or add new features.
Installing Performance Maps: Flash a pre-built performance map designed for your specific motorcycle and modifications.
Customizing ECU Settings: Modify various ECU parameters, such as rev limits or throttle response, to suit your preferences.

ECU flashing requires specialized software and hardware, as well as a thorough understanding of the ECU’s inner workings. Always proceed with caution and consult with experienced professionals before attempting to flash your ECU. CARDIAGTECH.NET can provide guidance and support for ECU flashing and reprogramming.

4. Benefits of Using a High-Quality KTM 6 Pin Connector Cable

Investing in a high-quality KTM 6 pin connector cable offers several advantages over cheaper, generic alternatives. Let’s explore the key benefits of choosing a premium cable from a trusted supplier like CARDIAGTECH.NET.

4.1. Reliable Connection

A high-quality cable ensures a secure and reliable connection between your motorcycle’s ECU and the diagnostic or tuning device. This is crucial for accurate data transfer and prevents communication errors that can lead to frustration and wasted time.

4.2. Durability

Premium cables are constructed from durable materials that can withstand the rigors of frequent use. They are designed to resist wear and tear, ensuring a long lifespan and reliable performance.

4.3. Protection Against Electrical Interference

High-quality cables are often shielded to protect against electrical interference, which can disrupt data transmission and lead to inaccurate readings. This is particularly important in the electrically noisy environment of a motorcycle engine bay.

4.4. Compatibility

A reputable supplier like CARDIAGTECH.NET ensures that their KTM 6 pin connector cables are fully compatible with the specified KTM, Husqvarna, and GASGAS models. This eliminates the risk of compatibility issues and ensures seamless integration with your diagnostic or tuning tools.

4.5. Safety

Using a high-quality cable reduces the risk of electrical damage to your motorcycle’s ECU or connected devices. Premium cables are designed to meet safety standards and provide reliable protection against overvoltage or short circuits.

4.6. Long-Term Cost Savings

While a high-quality KTM 6 pin connector cable may have a higher initial cost, it can save you money in the long run by:

Reducing the risk of ECU damage
Preventing communication errors and wasted time
Providing a longer lifespan than cheaper alternatives

4.7. Guarantee of Quality from CARDIAGTECH.NET

At CARDIAGTECH.NET, we stand behind the quality of our KTM 6 pin connector cables. We source our cables from reputable manufacturers and subject them to rigorous testing to ensure they meet our high standards for performance and reliability. When you purchase a cable from us, you can be confident that you’re getting a product that will deliver years of dependable service.

5. How to Use the KTM 6 Pin Connector Cable

Using the KTM 6 pin connector cable is a straightforward process, but it’s essential to follow the correct steps to avoid damaging your motorcycle’s ECU or diagnostic equipment. Here’s a step-by-step guide:

5.1. Gather Necessary Tools and Equipment

Before you begin, ensure you have all the necessary tools and equipment, including:

KTM 6 pin connector cable (correct type for your motorcycle)
Diagnostic scan tool or tuning device
Your motorcycle’s service manual (optional)
Clean rags or shop towels

5.2. Locate the ECU Connector

The ECU connector is typically located under the seat, behind the headlight, or in the airbox area. Refer to your motorcycle’s service manual for the precise location.

5.3. Disconnect the Battery (Optional but Recommended)

To prevent electrical damage, it’s recommended to disconnect the negative terminal of your motorcycle’s battery before connecting or disconnecting the KTM 6 pin connector cable.

5.4. Connect the KTM 6 Pin Connector Cable

Carefully align the KTM 6 pin connector cable with the ECU connector and push it in until it clicks into place. Ensure the connection is secure and that all pins are properly aligned.

5.5. Connect the Diagnostic or Tuning Device

Connect the other end of the KTM 6 pin connector cable to your diagnostic scan tool or tuning device. Follow the manufacturer’s instructions for connecting and operating the device.

5.6. Power On the Device and Follow Instructions

Power on your diagnostic scan tool or tuning device and follow the on-screen instructions. Depending on the device, you may need to select your motorcycle’s make, model, and year.

5.7. Perform Diagnostics, Tuning, or Data Logging

Use the diagnostic scan tool or tuning device to perform the desired functions, such as reading DTCs, flashing a new map, or logging engine data.

5.8. Disconnect and Reassemble

Once you’ve completed the desired tasks, disconnect the KTM 6 pin connector cable from the diagnostic scan tool or tuning device and the ECU connector. Reconnect the battery (if disconnected) and reassemble any components that were removed to access the ECU connector.

5.9. Verify Proper Operation

Start your motorcycle and verify that it is running properly. Check for any error codes or unusual behavior. If you encounter any issues, consult your motorcycle’s service manual or seek expert advice.

5.10. Safety Precautions

Always follow the manufacturer’s instructions for your diagnostic scan tool or tuning device.
Never force the KTM 6 pin connector cable into the ECU connector. If it doesn’t fit easily, double-check that you have the correct cable type for your motorcycle.
Be careful not to damage the pins on the ECU connector or the KTM 6 pin connector cable.
If you’re not comfortable performing these steps yourself, seek assistance from a qualified mechanic. CARDIAGTECH.NET can recommend experienced technicians in your area.

6. Common Issues and Troubleshooting

While the KTM 6 pin connector cable is a relatively simple device, you may encounter some common issues during use. Here’s a troubleshooting guide to help you resolve these problems:

6.1. No Connection or Communication Errors

Problem: The diagnostic scan tool or tuning device cannot connect to the ECU, or communication errors occur during data transfer.
Possible Causes:
- Incorrect KTM 6 pin connector cable type
- Loose or damaged connection
- Faulty diagnostic scan tool or tuning device
- Damaged ECU
Troubleshooting Steps:
1. Verify that you are using the correct KTM 6 pin connector cable type for your motorcycle.
2. Check the connection between the KTM 6 pin connector cable and the ECU connector. Ensure it is secure and that all pins are properly aligned.
3. Inspect the KTM 6 pin connector cable and the ECU connector for any signs of damage, such as bent or broken pins.
4. Try using a different diagnostic scan tool or tuning device to rule out a problem with the device itself.
5. If possible, test the KTM 6 pin connector cable on another compatible motorcycle to see if the problem persists.
6. If the problem persists, the ECU may be damaged and require repair or replacement. Contact CARDIAGTECH.NET for assistance in locating a qualified ECU repair service.

6.2. Inaccurate Readings or Data

Problem: The diagnostic scan tool or tuning device displays inaccurate readings or data.
Possible Causes:
- Faulty sensor
- Electrical interference
- Incorrect calibration
Troubleshooting Steps:
1. Check the sensor data for any obvious anomalies, such as out-of-range values or erratic fluctuations.
2. Inspect the wiring and connections to the sensor for any signs of damage or corrosion.
3. Try replacing the sensor with a known good sensor to see if the problem is resolved.
4. Ensure that the diagnostic scan tool or tuning device is properly calibrated for your motorcycle.
5. Move the KTM 6 pin connector cable and diagnostic scan tool or tuning device away from any potential sources of electrical interference, such as spark plug wires or ignition coils.
6. If the problem persists, the ECU may be misinterpreting the sensor data and require reprogramming. Contact CARDIAGTECH.NET for assistance in locating a qualified ECU tuning service.

6.3. Cable Damage

Problem: The KTM 6 pin connector cable is damaged, such as frayed wires or broken connectors.
Possible Causes:
- Normal wear and tear
- Accidental damage
- Exposure to harsh environments
Troubleshooting Steps:
1. Inspect the KTM 6 pin connector cable for any signs of damage, such as frayed wires, cracked insulation, or broken connectors.
2. If the damage is minor, you may be able to repair the cable by splicing the wires or replacing the connectors. However, it’s generally recommended to replace the cable with a new one to ensure reliable performance.
3. When replacing the KTM 6 pin connector cable, choose a high-quality cable from a reputable supplier like CARDIAGTECH.NET to ensure durability and reliability.

6.4. Compatibility Issues

Problem: The KTM 6 pin connector cable is not compatible with your motorcycle’s ECU or diagnostic scan tool.
Possible Causes:
- Incorrect cable type
- Outdated diagnostic scan tool
- Modified ECU
Troubleshooting Steps:
1. Verify that you are using the correct KTM 6 pin connector cable type for your motorcycle’s year, model, and ECU.
2. Ensure that your diagnostic scan tool is compatible with your motorcycle’s ECU. Check the manufacturer’s website for compatibility information.
3. If your ECU has been modified or replaced, it may not be compatible with standard diagnostic tools. Contact CARDIAGTECH.NET for assistance in locating a qualified ECU tuning service.

6.5. Seeking Professional Help

If you’re unable to resolve the issue using these troubleshooting steps, it’s best to seek professional help from a qualified mechanic or ECU tuning specialist. CARDIAGTECH.NET can recommend experienced technicians in your area.

7. Maintenance and Care Tips

Proper maintenance and care can extend the life of your KTM 6 pin connector cable and ensure reliable performance. Here are some tips to keep your cable in top condition:

7.1. Storage

Store the KTM 6 pin connector cable in a clean, dry place when not in use. Avoid exposing the cable to extreme temperatures, direct sunlight, or moisture.

7.2. Cleaning

Clean the KTM 6 pin connector cable regularly with a soft, dry cloth. Avoid using harsh chemicals or solvents, which can damage the cable’s insulation and connectors.

7.3. Inspection

Inspect the KTM 6 pin connector cable regularly for any signs of damage, such as frayed wires, cracked insulation, or broken connectors. Replace the cable if any damage is detected.

7.4. Handling

Handle the KTM 6 pin connector cable with care. Avoid bending or twisting the cable excessively, which can damage the internal wires.

7.5. Connector Protection

Protect the connectors on the KTM 6 pin connector cable from dirt, dust, and moisture. Use connector caps or plugs when the cable is not in use.

7.6. Avoiding Strain

Avoid putting unnecessary strain on the KTM 6 pin connector cable. When connecting or disconnecting the cable, support the cable near the connectors to prevent stress on the wires.

7.7. Regular Checks

Periodically check the connections between the KTM 6 pin connector cable and the ECU connector. Ensure that the connections are secure and that all pins are properly aligned.

7.8. Professional Servicing

If you’re not comfortable performing these maintenance tasks yourself, seek assistance from a qualified mechanic. CARDIAGTECH.NET can recommend experienced technicians in your area.

7.9. Additional Tips

Keep the KTM 6 pin connector cable away from sharp objects or abrasive surfaces.
Avoid using the cable in wet or humid environments.
Do not attempt to repair a damaged cable yourself unless you have the necessary skills and experience.
When replacing the KTM 6 pin connector cable, choose a high-quality cable from a reputable supplier like CARDIAGTECH.NET to ensure durability and reliability.

8. Purchasing a KTM 6 Pin Connector Cable from CARDIAGTECH.NET

When it comes to purchasing a KTM 6 pin connector cable, CARDIAGTECH.NET is your trusted source for high-quality, reliable products. Here’s why you should choose us:

8.1. Wide Selection

We offer a wide selection of KTM 6 pin connector cables to fit various KTM, Husqvarna, and GASGAS models. Whether you need a white 6 pin connector for a 2016-2022 model or a red 6 pin connector for a 2023 model, we have you covered.

8.2. Quality Assurance

All of our KTM 6 pin connector cables are sourced from reputable manufacturers and undergo rigorous testing to ensure they meet our high standards for performance and reliability.

8.3. Expert Advice

Our knowledgeable technicians are available to answer your questions and help you choose the correct KTM 6 pin connector cable for your motorcycle. You can reach us at +1 (641) 206-8880 for immediate assistance.

8.4. Competitive Pricing

We offer competitive pricing on all of our KTM 6 pin connector cables, ensuring you get the best value for your money.

8.5. Fast Shipping

We offer fast shipping on all orders, so you can get the KTM 6 pin connector cable you need quickly and easily.

8.6. Secure Ordering

Our website uses secure encryption technology to protect your personal and financial information, ensuring a safe and secure ordering experience.

8.7. Customer Satisfaction

We are committed to providing our customers with the best possible shopping experience. If you’re not satisfied with your purchase, simply return it for a full refund.

8.8. Easy Ordering Process

Ordering a KTM 6 pin connector cable from CARDIAGTECH.NET is easy and convenient. Simply visit our website, select the correct cable for your motorcycle, and add it to your cart. Then, follow the checkout process to complete your order.

8.9. Product Details

Each KTM 6 pin connector cable product page on our website provides detailed information about the cable, including compatibility, features, and specifications. This information will help you make an informed decision and choose the correct cable for your needs.

8.10. Ordering Information

Address: 276 Reock St, City of Orange, NJ 07050, United States
WhatsApp: +1 (641) 206-8880
Website: CARDIAGTECH.NET

9. Integrating the Maptuner Nano with the KTM 6 Pin Connector Cable

The Maptuner Nano is a revolutionary tuning device that allows you to reflash your KTM, Husqvarna, or GASGAS ECU without sending it out for programming. When paired with the KTM 6 pin connector cable, the Maptuner Nano unlocks a world of possibilities for optimizing your motorcycle’s performance.

9.1. Features of the Maptuner Nano

Wireless Bluetooth Connectivity: Connect to your Android or iOS smartphone via Bluetooth.
ECU Reflashing: Instantly reflash your ECU with new fuel and ignition maps.
Stock Tune Restoration: Restore your ECU to the stock tune settings if desired.
Live Monitoring: Monitor critical engine data, such as RPM, throttle position, and sensor readings.
Data Logging: Record live monitoring data for analysis and tuning adjustments (requires additional license).
Error Code Reading and Clearing: Read and clear diagnostic trouble codes (DTCs).

9.2. Connecting the Maptuner Nano

Connect the KTM 6 pin connector cable to your motorcycle’s ECU.
Connect the other end of the KTM 6 pin connector cable to the Maptuner Nano.
Download and install the Maptuner Nano app on your smartphone.
Pair your smartphone with the Maptuner Nano via Bluetooth.
Follow the instructions in the Maptuner Nano app to reflash your ECU, monitor engine data, or perform other functions.

9.3. Tuning with the Maptuner Nano

The Maptuner Nano allows you to easily tune your motorcycle’s ECU for optimal performance. You can choose from a library of pre-built maps or create your own custom maps.

9.4. Benefits of Using the Maptuner Nano

Increased Horsepower and Torque: Optimize your engine for maximum power and torque.
Improved Throttle Response: Customize the throttle map for a more responsive or smoother throttle feel.
Enhanced Fuel Efficiency: Adjust the fuel map to maximize fuel economy.
Customizable Settings: Modify various ECU parameters to suit your preferences.

9.5. Additional Information

The Maptuner Nano requires a tuning license specific to your vehicle.
Tuning licenses are not legal for sale or use in California.

9.6. Contact CARDIAGTECH.NET

For more information about the Maptuner Nano or the KTM 6 pin connector cable, contact CARDIAGTECH.NET at +1 (641) 206-8880.

10. Frequently Asked Questions (FAQ)

10.1. What is a KTM 6 pin connector cable?

A KTM 6 pin connector cable is a specialized cable designed to interface with the Keihin ECUs found on many KTM, Husqvarna, and GASGAS off-road motorcycles. It allows you to connect your bike’s ECU to diagnostic tools, tuning devices, or other equipment.

10.2. What is a Keihin ECU?

A Keihin ECU (Engine Control Unit) is an electronic control unit that manages various aspects of an engine’s operation, such as fuel injection and ignition timing. Keihin ECUs are commonly used on KTM, Husqvarna, and GASGAS motorcycles.

10.3. Which KTM, Husqvarna, and GASGAS models are compatible with the 6 pin connector cable?

The compatibility varies based on the model year:

White 6 Pin Connector: Typically used on 2016-2022 models and 2024+ off-road bikes.
Red 6 Pin Connector: Primarily used on 2023 off-road models.

10.4. How do I know which KTM 6 pin connector cable is right for my motorcycle?

Check your motorcycle’s service manual, inspect the ECU connector on your bike, or consult with an expert at CARDIAGTECH.NET to determine the correct cable type.

10.5. What are the benefits of using a high-quality KTM 6 pin connector cable?

A high-quality cable ensures a reliable connection, durability, protection against electrical interference, compatibility, and safety. It can also save you money in the long run by reducing the risk of ECU damage and preventing communication errors.

10.6. How do I use the KTM 6 pin connector cable?

Connect the cable to your motorcycle’s ECU and then to your diagnostic scan tool or tuning device. Follow the manufacturer’s instructions for operating the device.

10.7. What is the Maptuner Nano?

The Maptuner Nano is a tuning device that allows you to reflash your KTM, Husqvarna, or GASGAS ECU without sending it out for programming. It connects to your motorcycle’s ECU via the KTM 6 pin connector cable.

10.8. Where can I purchase a KTM 6 pin connector cable?

You can purchase a KTM 6 pin connector cable from CARDIAGTECH.NET. We offer a wide selection of high-quality cables at competitive prices.

10.9. How can I contact CARDIAGTECH.NET for assistance?

You can contact CARDIAGTECH.NET at +1 (641) 206-8880 or visit our website at CARDIAGTECH.NET. Our address is 276 Reock St, City of Orange, NJ 07050, United States.

10.10. What if I have issues using the KTM 6 pin connector cable?

Check for common issues like loose connections, damaged cables, or compatibility problems. If you can’t resolve the issue, seek professional help from a qualified mechanic or ECU tuning specialist.

You’re facing challenges with your KTM, Husqvarna, or GASGAS off-road bike, such as reduced engine performance, frequent diagnostic errors, or difficulty in tuning your ECU for optimal riding conditions. These issues can lead to frustration, increased repair costs, and a less enjoyable riding experience. You need reliable, high-quality tools that can help you diagnose and resolve these problems quickly and effectively.

CARDIAGTECH.NET offers the perfect solution: the KTM 6 Pin Connector Cable For Keihin ECUs. Our cables are specifically designed to provide a secure and reliable connection to your bike’s ECU, allowing you to access critical data, perform accurate diagnostics, and fine-tune your engine for peak performance. With our expert support and top-notch products, you can overcome these challenges and get back to enjoying your ride.

Don’t let these issues hold you back any longer. Contact CARDIAGTECH.NET today at +1 (641) 206-8880 or visit our website at CARDIAGTECH.NET to learn more about how our KTM 6 Pin Connector Cable and other diagnostic tools can help you optimize your motorcycle’s performance and keep it running smoothly. Our address is 276 Reock St, City of Orange, NJ 07050, United States. Let us help you unlock the full potential of your bike and take your riding experience to the next level.

KTM 6 Pin Connector Cable