2007 Ford Explorer Key Fob Programming: A Comprehensive Guide

The 2007 Ford Explorer Key Fob Programming is a process that allows you to synchronize a new or replacement key fob with your vehicle’s security system, and CARDIAGTECH.NET is here to give you a good solution. Proper key fob programming ensures that you can remotely lock, unlock, and even start your 2007 Ford Explorer with ease. Explore essential steps, valuable tips, and expert insights to master 2007 Ford Explorer key fob replacement. Unlock vehicle entry, keyless entry benefits, and key programming tools.

1. Understanding the 2007 Ford Explorer Key Fob System

The key fob system in your 2007 Ford Explorer is an integral part of your vehicle’s security and convenience features. It allows you to remotely control various functions, such as locking and unlocking doors, activating the panic alarm, and in some cases, even starting the engine.

1.1. Key Fob Components

A typical 2007 Ford Explorer key fob consists of the following components:

Buttons: These allow you to send commands to the vehicle, such as locking and unlocking doors, activating the panic alarm, or opening the liftgate.
Transmitter: This sends the radio frequency signal to the vehicle’s receiver.
Battery: This powers the transmitter and allows the key fob to function.
Microchip: This stores the unique identification code for your vehicle.

1.2. How the Key Fob Communicates with Your Vehicle

When you press a button on the key fob, the transmitter sends a radio frequency signal to the vehicle’s receiver. The receiver then decodes the signal and sends a command to the appropriate system, such as the door locks or the alarm system.

The vehicle’s computer system recognizes the key fob based on its unique identification code stored in the microchip. If the code matches, the vehicle will execute the command. If the code doesn’t match, the vehicle will ignore the command.

1.3. Security Features of the Key Fob System

The key fob system in your 2007 Ford Explorer includes several security features to prevent unauthorized access to your vehicle. These features include:

Rolling Codes: The key fob generates a new code each time you press a button. This prevents thieves from capturing the code and using it to unlock your vehicle later.
Encryption: The signal sent by the key fob is encrypted, making it difficult for thieves to intercept and decode.
Immobilizer System: The key fob works in conjunction with the vehicle’s immobilizer system, which prevents the engine from starting unless the correct key is present.

Alt: A new Ford Explorer key fob showcases the buttons for remote locking, unlocking, and panic alarm activation.

2. Why You Might Need to Reprogram Your Key Fob

There are several reasons why you might need to reprogram your 2007 Ford Explorer key fob:

2.1. Replacing a Lost or Stolen Key Fob

If you have lost or had your key fob stolen, you will need to reprogram a new key fob to regain access to your vehicle. Reprogramming ensures that the lost or stolen key fob is no longer recognized by your vehicle’s system, preventing unauthorized access.

2.2. Replacing a Damaged Key Fob

If your key fob is damaged, it may not function correctly. Buttons may not respond, the range may be reduced, or the key fob may not communicate with your vehicle at all. In this case, you will need to replace the damaged key fob and reprogram the new one.

2.3. Adding an Additional Key Fob

If you want to have an extra key fob for your vehicle, you will need to program it to work with your vehicle’s system. This is useful if you have multiple drivers or want to have a spare key fob in case of emergencies.

2.4. Battery Replacement

In some cases, replacing the battery in your key fob can cause it to lose its programming. While this is not always the case, it is a possibility. If your key fob stops working after a battery replacement, you may need to reprogram it.

2.5. System Malfunctions

Occasionally, the vehicle’s computer system may experience a glitch or malfunction that causes it to forget the key fob’s programming. In this case, you will need to reprogram the key fob to restore its functionality.

3. Essential Tools and Equipment for Key Fob Programming

Before you begin the key fob programming process, it’s essential to gather the necessary tools and equipment to ensure a smooth and successful procedure.

3.1. Working Key Fob

To program a new key fob, you will typically need at least one existing working key fob. This key fob is used to initiate the programming sequence and authenticate the new key fob.

3.2. New Key Fob

You will need a new, unprogrammed key fob that is compatible with your 2007 Ford Explorer. Make sure to purchase a key fob that is specifically designed for your vehicle’s year, make, and model. You can find key fobs at automotive parts stores, dealerships, or online retailers.

3.3. Vehicle Owner’s Manual

Your vehicle’s owner’s manual contains valuable information about the key fob programming process, including specific instructions and any required security codes. Consult your owner’s manual before proceeding with the programming.

3.4. Key Fob Programmer (Optional)

While some vehicles allow you to program key fobs manually, others may require a specialized key fob programmer. This device connects to your vehicle’s diagnostic port and allows you to program new key fobs using a computer interface.

3.5. Diagnostic Scan Tool (Optional)

A diagnostic scan tool can be helpful in identifying any underlying issues that may be preventing the key fob from programming correctly. It can also be used to clear any error codes that may be present in the vehicle’s computer system.

3.6. Security Code (If Required)

Some vehicles require a security code to program new key fobs. This code is typically found in the vehicle’s owner’s manual or on a tag attached to the original key fobs. If you don’t have the security code, you may need to obtain it from a dealership or a locksmith.

4. Step-by-Step Guide to Programming a 2007 Ford Explorer Key Fob

Follow these steps carefully to program your 2007 Ford Explorer key fob successfully.

4.1. Method 1: Programming with Two Existing Working Keys

If you have two existing working keys, you can program a third key fob yourself.

Insert an existing working key into the ignition cylinder.
Turn the ignition cylinder to ON (RUN) and back to OFF.
Remove the existing working key and, within five seconds, insert a second working key and turn it to ON (RUN) then back OFF.
Remove the second working key and insert the new key before ten seconds have elapsed and turn it to ON (RUN). Leave it on for one second and turn back to OFF.
The security light will light up for three seconds to indicate that the new key has been successfully programmed.

4.2. Method 2: Programming with One Existing Working Key (Using a Programmer)

If you only have one existing working key, you will need a key fob programmer to program additional key fobs.

Purchase a key fob programmer that is compatible with your 2007 Ford Explorer. CARDIAGTECH.NET can help you select the best option for your needs. Contact us via Whatsapp: +1 (641) 206-8880.
Connect the programmer to your vehicle’s diagnostic port, which is typically located under the dashboard.
Follow the instructions provided with the programmer to program the new key fob. This usually involves entering a security code and following a series of prompts on the programmer’s screen.
Once the programming is complete, test the new key fob to ensure that it works correctly.

4.3. Method 3: Programming with No Existing Working Keys

If you have lost all of your key fobs, you will need to contact a locksmith or dealership to have new key fobs programmed.

Call a mobile automotive locksmith to come to your vehicle and originate a new key. The locksmith will connect a special computer to your vehicle to program the new key.
Alternatively, tow your vehicle to a dealership, and they will originate a new key. The dealership will connect a special computer to your vehicle to program the new key.

4.4. Important Considerations

Make sure to follow the instructions carefully, as incorrect programming can damage your vehicle’s computer system.
If you are having trouble programming the key fob, consult your vehicle’s owner’s manual or contact a locksmith or dealership for assistance.

Alt: A car key with an attached key fob, showing the integration of physical key and remote functions.

5. Troubleshooting Common Key Fob Programming Issues

Even with careful attention to detail, you may encounter issues during the key fob programming process. Here are some common problems and how to troubleshoot them:

5.1. Key Fob Not Responding

If the key fob is not responding after programming, try the following:

Check the Battery: Ensure that the battery in the key fob is fresh and properly installed.
Reprogram the Key Fob: Repeat the programming process, making sure to follow each step carefully.
Check for Interference: Radio frequency interference can sometimes prevent the key fob from communicating with the vehicle. Try moving to a different location or turning off any nearby electronic devices.

5.2. Security Light Not Illuminating

If the security light does not illuminate during the programming process, try the following:

Verify the Ignition Switch Position: Ensure that the ignition switch is in the correct position (ON or RUN) as specified in the programming instructions.
Check the Key Fob Compatibility: Make sure that the key fob you are using is compatible with your 2007 Ford Explorer.
Consult a Professional: If the security light still does not illuminate, consult a locksmith or dealership for assistance.

5.3. Vehicle Not Starting

If the vehicle does not start after programming the key fob, try the following:

Check the Immobilizer System: The immobilizer system may not be recognizing the new key fob. Try reprogramming the key fob or consulting a locksmith or dealership.
Check the Fuel Supply: Ensure that the vehicle has sufficient fuel.
Check the Battery: Ensure that the vehicle’s battery is fully charged.

5.4. Error Codes

If you encounter any error codes during the programming process, use a diagnostic scan tool to identify the cause of the error. Clear the error codes and try programming the key fob again.

5.5. When to Seek Professional Help

If you have tried all of the troubleshooting steps and are still unable to program your key fob, it is best to seek professional help from a locksmith or dealership. They have the expertise and equipment to diagnose and resolve any complex issues that may be preventing the key fob from programming correctly.

6. Key Fob Programming: DIY vs. Professional Services

When it comes to key fob programming, you have two main options: do it yourself (DIY) or hire professional services. Each option has its own advantages and disadvantages.

6.1. DIY Key Fob Programming

Advantages:

Cost Savings: DIY key fob programming can save you money compared to hiring a professional.
Convenience: You can program the key fob at your own convenience, without having to schedule an appointment or take your vehicle to a shop.
Learning Experience: DIY key fob programming can be a valuable learning experience, allowing you to gain a better understanding of your vehicle’s systems.

Disadvantages:

Complexity: Key fob programming can be complex, especially for newer vehicles with advanced security systems.
Risk of Damage: Incorrect programming can damage your vehicle’s computer system.
Time Investment: DIY key fob programming can take time and effort, especially if you are not familiar with the process.

6.2. Professional Key Fob Programming Services

Advantages:

Expertise: Locksmiths and dealerships have the expertise and experience to program key fobs correctly.
Specialized Equipment: Professionals have access to specialized equipment that is required for programming some key fobs.
Warranty: Professional key fob programming services typically come with a warranty, protecting you from any potential issues.

Disadvantages:

Cost: Professional key fob programming services can be more expensive than DIY programming.
Inconvenience: You will need to schedule an appointment and take your vehicle to a shop.

6.3. Making the Right Choice

The best choice for you will depend on your individual circumstances, technical skills, and budget.

If you are comfortable working on your vehicle and have the necessary tools and equipment, DIY key fob programming can be a cost-effective option. However, if you are not confident in your abilities or if you have a newer vehicle with an advanced security system, it is best to hire professional services.

7. The Importance of Using Genuine Ford Key Fobs

When replacing or adding key fobs for your 2007 Ford Explorer, it’s crucial to use genuine Ford key fobs. While aftermarket key fobs may seem like a more affordable option, they can often lead to compatibility issues and other problems.

7.1. Compatibility Issues

Genuine Ford key fobs are specifically designed to work with your vehicle’s security system. Aftermarket key fobs may not be fully compatible, leading to issues such as:

Failure to program correctly
Intermittent operation
Reduced range
Malfunctioning buttons

7.2. Security Risks

Aftermarket key fobs may not have the same level of security as genuine Ford key fobs. This can make your vehicle more vulnerable to theft.

7.3. Warranty Concerns

Using aftermarket key fobs may void your vehicle’s warranty. Ford may not be responsible for any damage caused by aftermarket key fobs.

7.4. Reliability and Durability

Genuine Ford key fobs are made from high-quality materials and are designed to withstand the rigors of daily use. Aftermarket key fobs may be made from cheaper materials and may not be as durable.

7.5. Where to Purchase Genuine Ford Key Fobs

You can purchase genuine Ford key fobs from:

Ford dealerships
Authorized Ford parts retailers
Reputable online retailers

When purchasing key fobs online, make sure to verify that the seller is an authorized Ford parts retailer.

8. Programming a New Key When All Keys Are Lost

Losing all your keys can be a stressful situation. Here’s what to do if you find yourself without any working keys for your 2007 Ford Explorer:

8.1. Contact a Locksmith or Dealership

The first step is to contact a qualified locksmith or your local Ford dealership. They have the tools and expertise to create a new key for your vehicle, even without an existing key to copy.

8.2. Proof of Ownership

Be prepared to provide proof of ownership for your vehicle. This may include your vehicle registration, title, or insurance card. The locksmith or dealership will need to verify that you are the rightful owner of the vehicle before they can create a new key.

8.3. Key Cutting and Programming

The locksmith or dealership will use specialized equipment to cut a new key that matches your vehicle’s ignition. They will also need to program the key to work with your vehicle’s immobilizer system. This process may involve connecting a diagnostic tool to your vehicle’s computer and entering a security code.

8.4. Cost Considerations

Creating a new key when all keys are lost can be more expensive than simply duplicating an existing key. The cost will vary depending on the locksmith or dealership you choose, as well as the complexity of your vehicle’s security system.

8.5. Prevention Tips

To avoid the hassle and expense of losing all your keys, consider the following prevention tips:

Keep a spare key in a safe and secure location.
Use a key finder device to help you locate your keys if they are lost.
Consider purchasing a key insurance policy to cover the cost of replacing lost keys.

9. Key Fob Battery Replacement: A Simple Guide

The key fob battery is essential for the remote to function correctly. Here’s how to replace it:

9.1. Identifying the Need for a Battery Replacement

Reduced Range: You need to be closer to your car for the key fob to work.
Intermittent Function: The key fob works sometimes but not others.
Non-Functioning Buttons: Pressing buttons does nothing.

9.2. Tools and Materials Needed

New Battery: Usually a CR2032 battery, but check your owner’s manual.
Small Screwdriver or Pry Tool: To open the key fob case.
Soft Cloth: To protect the key fob from scratches.

9.3. Step-by-Step Battery Replacement

Open the Key Fob: Use the small screwdriver or pry tool to gently open the key fob case. Some key fobs have a small notch to insert the tool.
Remove the Old Battery: Carefully remove the old battery. Note the orientation (+ side up or down).
Insert the New Battery: Place the new battery in the same orientation as the old one.
Close the Key Fob: Snap the key fob case back together until it is securely closed.
Test the Key Fob: Press the buttons to ensure the key fob is working correctly.

9.4. Tips for a Successful Replacement

Work on a Soft Surface: To avoid scratching the key fob.
Handle the Battery Carefully: Avoid touching the battery contacts with your fingers.
Dispose of Old Batteries Properly: Recycle old batteries at a designated recycling center.

10. Enhancing Your Car Security: Additional Tips

Beyond key fob programming, there are several steps you can take to further enhance the security of your 2007 Ford Explorer:

10.1. Install an Aftermarket Alarm System

Consider installing an aftermarket alarm system with features such as:

Motion Sensors: Detect movement inside the vehicle.
Glass Break Sensors: Detect the sound of breaking glass.
Tilt Sensors: Detect when the vehicle is being towed or lifted.
Remote Monitoring: Allows you to monitor your vehicle’s security from your smartphone.

10.2. Use a Steering Wheel Lock

A steering wheel lock is a physical deterrent that prevents thieves from steering your vehicle.

10.3. Install a GPS Tracking Device

A GPS tracking device allows you to track your vehicle’s location in real-time. This can be helpful if your vehicle is stolen.

10.4. Park in Well-Lit Areas

When parking your vehicle, choose well-lit areas that are visible to the public. This can deter thieves from targeting your vehicle.

10.5. Be Aware of Your Surroundings

Pay attention to your surroundings when approaching or leaving your vehicle. If you notice anything suspicious, contact the authorities.

10.6. Keep Valuables Out of Sight

Avoid leaving valuables in plain sight inside your vehicle. This can attract thieves.

10.7. Engrave Your Vehicle Identification Number (VIN) on Windows

Engraving your VIN on your vehicle’s windows can make it more difficult for thieves to sell the vehicle.

10.8. Consider Window Tinting

Window tinting can make it more difficult for thieves to see inside your vehicle.

By taking these additional steps, you can significantly enhance the security of your 2007 Ford Explorer and protect it from theft.

11. Understanding Transponder Keys and Their Role

Transponder keys are an integral part of modern vehicle security systems, including the 2007 Ford Explorer. These keys contain a microchip that communicates with the vehicle’s immobilizer system, preventing unauthorized starting of the engine.

11.1. How Transponder Keys Work

When you insert a transponder key into the ignition, the vehicle’s immobilizer system sends a radio frequency signal to the key. The microchip in the key responds with a unique code. If the code matches the code stored in the vehicle’s computer, the immobilizer system allows the engine to start. If the codes don’t match, the engine will not start.

11.2. The Importance of Transponder Key Programming

Transponder keys must be programmed to work with your vehicle’s immobilizer system. This programming process involves entering a security code into the vehicle’s computer and then following a series of steps to synchronize the key with the immobilizer system.

11.3. Transponder Key Cloning vs. Programming

There are two main methods for creating a duplicate transponder key: cloning and programming.

Cloning: Cloning involves copying the data from an existing transponder key to a new key. This method is faster and easier than programming, but it is not as secure. If a thief steals your original key, they can use it to clone another key and gain access to your vehicle.
Programming: Programming involves entering a security code into the vehicle’s computer and then following a series of steps to synchronize the new key with the immobilizer system. This method is more secure than cloning, as it creates a unique key that is not linked to the original key.

11.4. Choosing the Right Method

The best method for creating a duplicate transponder key will depend on your individual circumstances and security needs. If you are concerned about security, programming is the best option. If you are looking for a faster and easier solution, cloning may be a better choice.

12. Advanced Key Fob Features and Customization

Modern key fobs, including those for the 2007 Ford Explorer, often come with advanced features and customization options that can enhance your driving experience.

12.1. Remote Start

Some 2007 Ford Explorer key fobs may have a remote start feature, allowing you to start the engine from a distance. This can be useful for warming up the engine in cold weather or cooling down the interior in hot weather.

12.2. Keyless Entry

Keyless entry allows you to unlock and lock your vehicle’s doors without using a key. Simply press a button on the key fob, and the doors will unlock or lock automatically.

12.3. Panic Alarm

The panic alarm feature allows you to activate the vehicle’s alarm system by pressing a button on the key fob. This can be useful in emergency situations.

12.4. Memory Settings

Some key fobs can store memory settings for the driver’s seat, mirrors, and steering wheel. This allows you to customize the vehicle’s settings to your preferences.

12.5. Customization Options

Some key fobs can be customized with different colors, materials, or keychains. This allows you to personalize your key fob to your individual style.

12.6. Exploring Available Options

Consult your vehicle’s owner’s manual or contact a Ford dealership to learn more about the advanced features and customization options available for your 2007 Ford Explorer key fob.

13. CARDIAGTECH.NET: Your Partner in Automotive Solutions

At CARDIAGTECH.NET, we understand the challenges faced by auto repair professionals like you. The demanding work, constant exposure to grease and chemicals, and the need to stay updated with the latest automotive technology can be overwhelming. That’s why we offer a comprehensive range of high-quality auto repair tools and equipment designed to enhance your efficiency, accuracy, and safety.

We’ve heard your concerns about finding the right tools that fit your budget and deliver lasting performance. Our products are carefully selected to meet the needs of both young, ambitious technicians and seasoned garage owners. We know you need tools that not only get the job done but also stand the test of time.

Whether you’re dealing with complex key fob programming, engine diagnostics, or any other automotive repair task, CARDIAGTECH.NET has the solutions you need to succeed. Contact us today via Whatsapp at +1 (641) 206-8880 or visit our website CARDIAGTECH.NET to explore our extensive catalog and discover how we can help you elevate your auto repair business. Our address is 276 Reock St, City of Orange, NJ 07050, United States.

Don’t let outdated tools hold you back. Invest in the best, and watch your productivity and profits soar.

Alt: A mechanic in a garage uses a tablet to diagnose and repair a car, showing modern automotive repair technology.

14. Frequently Asked Questions (FAQs) about 2007 Ford Explorer Key Fob Programming

Here are some frequently asked questions about 2007 Ford Explorer Key Fob Programming:

14.1. Can I program a new key fob myself if I have no working keys?

No, you cannot program a new key fob yourself if you have no working keys. You will need to contact a locksmith or dealership to have new key fobs programmed.

14.2. Can I program a second key fob myself if I have one working key?

Yes, you can program a second key fob yourself if you have one working key, but you may need a key fob programmer.

14.3. Can I program a third key fob myself if I have two working keys?

Yes, you can program a third key fob yourself if you have two working keys by following a specific sequence of steps involving the ignition cylinder.

14.4. How much does it cost to program a key fob for a 2007 Ford Explorer?

The cost to program a key fob for a 2007 Ford Explorer varies depending on whether you do it yourself or hire a professional. DIY programming may require purchasing a key fob programmer, while professional services will include labor costs.

14.5. Where can I find the security code for my 2007 Ford Explorer key fob?

The security code for your 2007 Ford Explorer key fob may be found in your vehicle’s owner’s manual or on a tag attached to the original key fobs. If you don’t have the security code, you may need to obtain it from a dealership or a locksmith.

14.6. What type of battery does a 2007 Ford Explorer key fob use?

A 2007 Ford Explorer key fob typically uses a CR2032 battery. Consult your owner’s manual for the exact battery type.

14.7. How do I know if my key fob battery is low?

Signs of a low key fob battery include reduced range, intermittent function, or non-functioning buttons.

14.8. Can I use an aftermarket key fob for my 2007 Ford Explorer?

While you can use an aftermarket key fob for your 2007 Ford Explorer, it is recommended to use genuine Ford key fobs for compatibility and security reasons.

14.9. What should I do if my key fob is lost or stolen?

If your key fob is lost or stolen, contact a locksmith or dealership to have a new key fob programmed. Also, consider changing the locks on your vehicle for added security.

14.10. Is it possible to disable a lost or stolen key fob?

Yes, a locksmith or dealership can disable a lost or stolen key fob so that it will no longer work with your vehicle.

15. Key Programming Tools Available at CARDIAGTECH.NET

Tool Name	Description	Price	Features
Autel MaxiIM IM608 Pro	Advanced key programming and diagnostic tool for various vehicle makes and models.	$2,999.00	Key programming, ECU coding, advanced diagnostics, IMMO functions, remote assistance.
Xtool X100 PAD3	Professional key programmer with comprehensive IMMO functions and special functions.	$799.00	Key programming, odometer adjustment, special functions, EEPROM adapter, ECU programming.
Launch X431 V+	Diagnostic and key programming tool with wide vehicle coverage.	$1,299.00	Key programming, full system diagnostics, special functions, online programming, remote diagnosis.
OBDSTAR X300 DP Plus	All-in-one key programmer with advanced IMMO functions and diagnostic capabilities.	$1,499.00	Key programming, odometer correction, ECU programming, IMMO functions, adapter set included.
TOPDON T-Ninja 1000	Key programming tool with user-friendly interface and wide vehicle coverage.	$949.00	Key programming, IMMO functions, PIN code reading, remote key generation, online updates.
Autel MaxiSys Elite II Pro	High-end diagnostic and key programming tool with J2534 ECU programming.	$3,499.00	Key programming, ECU programming, advanced diagnostics, OE-level functions, topology mapping.
Xtool EZ400 Pro	Portable key programmer with comprehensive IMMO functions and special functions.	$649.00	Key programming, odometer adjustment, special functions, EEPROM adapter, key learning.
Launch CRP919X	Diagnostic and key programming tool with extensive vehicle coverage and special functions.	$899.00	Key programming, full system diagnostics, special functions, online updates, remote diagnosis.
OBDSTAR DP5	Key programmer with basic IMMO functions and key learning capabilities.	$599.00	Key programming, PIN code reading, key learning, basic IMMO functions, compact design.
TOPDON T-Ninja Box	Key programming adapter for advanced IMMO functions and key learning.	$299.00	Key programming adapter, advanced IMMO functions, key learning, works with various key programming tools.
Autel XP400 Pro	Key and chip programming tool for advanced IMMO functions and chip reading.	$999.00	Key programming, chip reading, IMMO functions, EEPROM programming, MCU programming.
Xtool KC100	Key chip programmer for key cloning and chip reading.	$199.00	Key chip programming, key cloning, chip reading, works with Xtool key programming tools.
Launch X-Prog 3	Key and chip programmer for advanced IMMO functions and chip reading.	$499.00	Key programming, chip reading, IMMO functions, EEPROM programming, MCU programming.
OBDSTAR P001 Programmer	Key programmer adapter for various IMMO functions and key learning.	$199.00	Key programming adapter, IMMO functions, key learning, works with OBDSTAR key programming tools.
TOPDON Phoenix Key	Key programming tool with comprehensive IMMO functions and user-friendly interface.	$799.00	Key programming, IMMO functions, PIN code reading, remote key generation, online updates.
Autel G-BOX3	Key programming adapter for advanced IMMO functions and key learning.	$349.00	Key programming adapter, advanced IMMO functions, key learning, works with Autel key programming tools.
Xtool EEPROM Adapter	EEPROM adapter for ECU programming and chip reading.	$99.00	EEPROM adapter, ECU programming, chip reading, works with Xtool key programming tools.
Launch IMMO Plus	Key programming tool with basic IMMO functions and key learning capabilities.	$699.00	Key programming, PIN code reading, key learning, basic IMMO functions, compact design.
OBDSTAR RFID Adapter	RFID adapter for key cloning and chip reading.	$99.00	RFID adapter, key cloning, chip reading, works with OBDSTAR key programming tools.
TOPDON Smart Key Programmer (SKP)	Key programming tool with user-friendly interface and basic IMMO functions.	$499.00	Key programming, IMMO functions, PIN code reading, remote key generation, online updates.

Disclaimer: All product names, trademarks and registered trademarks are property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.