How to Replace Ball Joints on a Mercedes: A Pro Guide

Replacing ball joints on a Mercedes, particularly models like the SLK 230 and 320, doesn’t have to be a daunting task. CARDIAGTECH.BIZ provides the tools and know-how to simplify this process, ensuring your Mercedes handles smoothly and safely. Replacing worn ball joints improves handling and prevents further damage to your vehicle’s suspension system and other components. You’ll find that proper maintenance, supported by the right tools, is a cost-effective way to ensure your Mercedes performs optimally and avoids extensive repairs.

1. Understanding Ball Joints and Their Importance

What are ball joints, and why are they so crucial for your Mercedes? Ball joints are pivotal suspension components that connect the control arms to the steering knuckles, allowing for smooth and controlled movement of the wheels. According to a study by the University of Michigan Transportation Research Institute, worn ball joints can lead to significant steering and handling issues, increasing the risk of accidents. These joints enable your wheels to move up and down and turn left and right, providing a smooth and stable ride. Neglecting worn ball joints can lead to uneven tire wear, steering instability, and even suspension failure.

1.1. Functions of Ball Joints

What specific roles do ball joints play in your Mercedes’ suspension system? Ball joints are essential for several critical functions. They act as a pivot point, allowing the wheels to move in conjunction with the suspension system. They facilitate the up-and-down movement of the wheels as you drive over bumps and uneven surfaces. Ball joints also enable the turning motion required for steering. Without properly functioning ball joints, your Mercedes would suffer from poor handling, reduced steering responsiveness, and increased wear on other suspension components.

1.2. Types of Ball Joints

What different types of ball joints are used in Mercedes vehicles? Mercedes vehicles typically use two main types of ball joints: upper and lower ball joints. The upper ball joints connect the upper control arms to the steering knuckle, while the lower ball joints connect the lower control arms to the steering knuckle. According to SAE International, the design and materials of these ball joints are crucial for durability and performance. Lower ball joints generally bear more load and stress due to their position and the forces acting upon them. Depending on the Mercedes model, the design and construction of the ball joints can vary, but their fundamental function remains the same.

1.3. Signs of Worn Ball Joints

How can you tell if the ball joints in your Mercedes are worn and need replacement? Recognizing the signs of worn ball joints early can prevent more significant problems and costly repairs. Common indicators include:

Clunking Noises: A noticeable clunking sound coming from the front suspension, especially when driving over bumps or making turns.
Steering Issues: Vague or loose steering, making it difficult to maintain a straight line.
Uneven Tire Wear: Unusual wear patterns on your tires, particularly on the inner or outer edges.
Vibrations: Excessive vibrations in the steering wheel.
Visual Inspection: Visible damage, such as torn or cracked rubber boots, and excessive play in the joint.

According to a report by the National Highway Traffic Safety Administration (NHTSA), neglecting these signs can lead to suspension failure, posing a significant safety risk. Regular inspections and timely replacement of worn ball joints are crucial for maintaining your Mercedes’ safety and performance.

2. Essential Tools for Ball Joint Replacement on a Mercedes

What tools do you need to replace ball joints on your Mercedes effectively? To successfully replace the ball joints on your Mercedes, having the right tools is essential. Equipping yourself with high-quality tools from CARDIAGTECH.BIZ will make the job easier and ensure precision and safety.

2.1. List of Necessary Tools

What specific tools are required for ball joint replacement? Here is a comprehensive list of tools you will need:

Tool	Purpose
Impact Wrench (Powered or Air)	To quickly loosen and tighten nuts and bolts.
18 mm Socket	For removing the brake caliper.
22 mm Socket	For removing the lower ball joint.
Ball Joint Extractor/Separator	To safely and easily separate the ball joint from the steering knuckle or control arm.
Torque Wrench	To tighten bolts to the manufacturer’s specified torque settings.
Jack and Jack Stands	To safely lift and support the vehicle.
Wheel Chocks	To prevent the vehicle from rolling.
Pry Bar	To help with levering and separating components.
Hammer	To gently tap components into place (use with caution).
Penetrating Oil	To loosen corroded nuts and bolts.
Safety Glasses and Gloves	To protect your eyes and hands.
Mercedes-Specific Ball Joints	Ensure you have the correct replacement ball joints designed for your specific Mercedes model

According to ASE (Automotive Service Excellence), using the correct tools not only ensures the job is done right but also reduces the risk of damage to other vehicle components. CARDIAGTECH.BIZ offers a wide range of high-quality tools designed to meet the needs of both professional mechanics and DIY enthusiasts.

2.2. The Importance of a Ball Joint Extractor

Why is a ball joint extractor a crucial tool for this job? A ball joint extractor, also known as a ball joint separator, is a critical tool for removing ball joints without causing damage to surrounding components. Traditionally, mechanics would use a hammer to dislodge the ball joint, which can be risky and potentially damage the steering knuckle or control arm. The ball joint extractor applies controlled pressure to separate the joint, making the process safer and more efficient.

As highlighted in a technical paper by Bosch, using specialized tools like ball joint extractors minimizes the risk of damaging sensitive suspension components. With a ball joint extractor from CARDIAGTECH.BIZ, you can avoid the headache and potential costs associated with damaging your vehicle during ball joint replacement.

2.3. Choosing the Right Ball Joint Extractor

What should you look for when selecting a ball joint extractor for your Mercedes? When choosing a ball joint extractor, consider the following factors to ensure it meets your needs:

Compatibility: Ensure the extractor is compatible with your Mercedes model, specifically the SLK 230 or 320.
Durability: Look for a tool made from high-quality materials, such as hardened steel, to withstand the pressure required for ball joint separation.
Adjustability: Opt for an extractor with adjustable arms or adapters to accommodate different ball joint sizes.
Ease of Use: Choose a tool that is easy to set up and operate, with a comfortable grip and clear instructions.
Brand Reputation: Consider purchasing from a reputable brand known for producing reliable automotive tools.

CARDIAGTECH.BIZ offers a range of ball joint extractors that are specifically designed for Mercedes vehicles, ensuring compatibility and ease of use.

3. Step-by-Step Guide to Replacing Ball Joints on a Mercedes

How do you replace ball joints on a Mercedes SLK 230 or 320? Replacing ball joints on a Mercedes requires careful attention to detail and adherence to safety precautions. Follow this step-by-step guide to ensure a successful replacement:

3.1. Preparation and Safety Measures

What safety precautions should you take before starting the ball joint replacement? Before you begin, prioritize safety by following these essential steps:

Park on a Level Surface: Ensure your Mercedes is parked on a flat, level surface.
Engage the Parking Brake: Fully engage the parking brake to prevent the vehicle from rolling.
Chock the Wheels: Place wheel chocks behind the rear wheels to provide additional security.
Gather Your Tools: Have all the necessary tools within easy reach.
Wear Safety Gear: Always wear safety glasses and gloves to protect your eyes and hands.
Consult the Service Manual: Refer to your Mercedes service manual for specific instructions and torque specifications.

According to OSHA (Occupational Safety and Health Administration), following these safety measures is crucial to prevent accidents and injuries while working on vehicles.

3.2. Lifting the Vehicle and Removing the Wheel

How do you safely lift the vehicle and remove the wheel to access the ball joint?

Loosen the Lug Nuts: Use an impact wrench to loosen the lug nuts on the wheel of the ball joint you will be replacing. Do not remove them completely at this stage.
Position the Jack: Consult your Mercedes owner’s manual for the correct jacking points. Place the jack under the designated lifting point.
Lift the Vehicle: Raise the vehicle until the wheel is off the ground.
Secure with Jack Stands: Place jack stands under the vehicle’s frame or chassis near the jacking point. Ensure the jack stands are securely positioned.
Lower onto Jack Stands: Carefully lower the vehicle onto the jack stands. The jack stands should bear the vehicle’s weight, not the jack.
Remove the Wheel: Now, fully remove the lug nuts and take off the wheel.

Following these steps ensures the vehicle is safely supported, allowing you to work on the suspension system without risk.

3.3. Disconnecting the Brake Caliper

How do you safely disconnect the brake caliper to access the ball joint?

Locate the Brake Caliper Bolts: Find the bolts that secure the brake caliper to the steering knuckle. Typically, these are 18 mm bolts.
Remove the Bolts: Use an 18 mm socket and an impact wrench or ratchet to remove the bolts.
Detach the Caliper: Carefully detach the brake caliper from the steering knuckle. Be careful not to damage the brake line.
Secure the Caliper: Use a bungee cord or wire to hang the caliper from the suspension spring or another secure point. This prevents strain on the brake line.

According to Brembo, a leading brake component manufacturer, avoid letting the caliper hang by the brake line, as this can damage the line and compromise braking performance.

3.4. Separating the Ball Joint

How do you use a ball joint extractor to safely separate the ball joint from the steering knuckle or control arm?

Apply Penetrating Oil: Spray penetrating oil on the ball joint stud and the surrounding area to help loosen any corrosion.
Position the Ball Joint Extractor: Place the ball joint extractor around the ball joint, ensuring the tool’s arms are securely positioned on the steering knuckle or control arm.
Tighten the Extractor: Gradually tighten the extractor’s screw or bolt. As you tighten, the tool will apply pressure to the ball joint stud, pushing it out of its socket.
Monitor Progress: Keep an eye on the ball joint and the surrounding components as you tighten the extractor. If the ball joint is particularly stubborn, apply more penetrating oil and try again.
Separate the Joint: Once enough pressure is applied, the ball joint should pop free from the steering knuckle or control arm.

As demonstrated in various automotive repair videos on YouTube, using a ball joint extractor makes this process significantly easier and safer than using a hammer.

Using a ball joint extractor to safely remove the ball joint from the steering knuckle, ensuring no damage to surrounding suspension parts.

3.5. Removing the Old Ball Joint

What steps are involved in removing the old ball joint from the control arm?

Inspect the Ball Joint: Examine the old ball joint to determine how it is attached to the control arm. Some ball joints are bolted in, while others are pressed in.
Remove Bolts (if applicable): If the ball joint is bolted in, remove the bolts using the appropriate socket and wrench.
Press Out the Ball Joint (if applicable): If the ball joint is pressed in, you will need a ball joint press tool. Position the press tool around the ball joint and control arm, and use the tool to press the old ball joint out of the control arm.
Clean the Mounting Surface: Once the old ball joint is removed, clean the mounting surface on the control arm to ensure a proper fit for the new ball joint.

According to SKF, a leading manufacturer of automotive bearings and seals, ensuring a clean mounting surface is crucial for the longevity and performance of the new ball joint.

3.6. Installing the New Ball Joint

How do you install the new ball joint into the control arm?

Position the New Ball Joint: Place the new ball joint into the control arm, aligning it correctly.
Press In the Ball Joint (if applicable): If the ball joint is pressed in, use the ball joint press tool to press the new ball joint into the control arm until it is fully seated.
Install Bolts (if applicable): If the ball joint is bolted in, install the bolts and tighten them to the manufacturer’s specified torque.
Grease the Ball Joint: Apply grease to the new ball joint to ensure smooth operation and prolong its lifespan.

As noted in a technical bulletin by Moog Suspension, proper installation and greasing are essential for optimal ball joint performance.

3.7. Reassembling the Components

How do you reassemble all the components after installing the new ball joint?

Reattach the Ball Joint to the Steering Knuckle: Position the steering knuckle over the new ball joint stud and secure it in place.
Tighten the Ball Joint Nut: Install the ball joint nut and tighten it to the manufacturer’s specified torque. Use a torque wrench to ensure accurate tightening.
Reinstall the Brake Caliper: Reattach the brake caliper to the steering knuckle and secure it with the bolts you removed earlier. Tighten the bolts to the specified torque.
Reattach the Wheel: Mount the wheel back onto the hub and tighten the lug nuts by hand.
Lower the Vehicle: Carefully lower the vehicle back to the ground, removing the jack stands.
Final Tightening: Use a torque wrench to tighten the lug nuts to the manufacturer’s specified torque in a star pattern.

Following these steps ensures that all components are properly reassembled and tightened, maintaining the vehicle’s safety and performance.

3.8. Final Checks and Test Drive

What final checks should you perform after completing the ball joint replacement?

Inspect All Connections: Double-check all nuts, bolts, and connections to ensure they are properly tightened.
Check Brake Lines: Ensure the brake lines are not twisted or damaged.
Grease Fittings: If your ball joint has grease fittings, grease them thoroughly.
Test Drive: Take the vehicle for a test drive to check for any unusual noises, vibrations, or steering issues.
Alignment Check: It’s a good idea to get a wheel alignment after replacing ball joints to ensure optimal handling and tire wear, although it is not required in this case.

According to a study by Hunter Engineering, a leader in wheel alignment equipment, a proper wheel alignment can significantly improve vehicle handling and tire life.

4. Common Issues and Troubleshooting

What are some common problems you might encounter during ball joint replacement and how do you solve them? Even with the right tools and a detailed guide, you may encounter some challenges during ball joint replacement. Here are some common issues and troubleshooting tips:

4.1. Stuck or Corroded Ball Joints

What should you do if the ball joint is stuck or heavily corroded?

Apply More Penetrating Oil: Generously apply penetrating oil to the ball joint stud and surrounding area. Let it soak for at least 30 minutes before attempting to remove the joint.
Use Heat: Apply heat to the surrounding area using a heat gun or torch (use caution to avoid damaging other components). Heat can help break down corrosion and loosen the joint.
Try a Hammer: Gently tap the steering knuckle or control arm around the ball joint with a hammer to help loosen the joint. Be careful not to damage the components.
Use a More Powerful Extractor: If the ball joint is extremely stubborn, consider using a more robust ball joint extractor or taking the vehicle to a professional mechanic.

4.2. Stripped or Damaged Threads

What if you strip or damage the threads on the ball joint stud or nut?

Use a Thread Repair Kit: If the threads are only slightly damaged, you may be able to repair them using a thread repair kit.
Replace the Ball Joint or Nut: If the threads are severely damaged, it is best to replace the ball joint or nut.
Seek Professional Help: If you are not comfortable repairing or replacing the threads yourself, consult a professional mechanic.

4.3. Incorrect Torque Specifications

What happens if you don’t tighten the nuts and bolts to the correct torque specifications?

Under-Tightening: Under-tightening can cause the nuts and bolts to loosen over time, leading to instability and potential failure of the suspension components.
Over-Tightening: Over-tightening can strip the threads or damage the components, compromising their strength and integrity.

Always use a torque wrench to tighten nuts and bolts to the manufacturer’s specified torque settings. Refer to your Mercedes service manual for the correct torque specifications.

Using a torque wrench to tighten the ball joint nut to the manufacturer’s specified torque ensures proper installation and safety.

5. Benefits of Choosing CARDIAGTECH.BIZ for Your Automotive Tool Needs

Why should you purchase your automotive tools and equipment from CARDIAGTECH.BIZ? At CARDIAGTECH.BIZ, we understand the importance of having high-quality, reliable tools for automotive repairs. Here are some of the benefits of choosing us for your automotive tool needs:

5.1. Wide Selection of High-Quality Tools

What types of tools does CARDIAGTECH.BIZ offer? We offer a comprehensive selection of tools, including impact wrenches, sockets, ball joint extractors, torque wrenches, and more. All our tools are sourced from reputable manufacturers and are designed to meet the demands of professional mechanics and DIY enthusiasts.

5.2. Mercedes-Specific Tools and Equipment

Does CARDIAGTECH.BIZ offer tools specifically designed for Mercedes vehicles? We specialize in providing tools and equipment that are specifically designed for Mercedes vehicles, ensuring compatibility and ease of use. Our Mercedes-specific ball joint extractors, for example, are engineered to fit the unique dimensions of Mercedes suspension systems.

5.3. Expert Advice and Support

Can CARDIAGTECH.BIZ provide guidance on tool selection and usage? Our team of experienced professionals is dedicated to providing expert advice and support to help you choose the right tools for your specific needs. Whether you have questions about tool compatibility, usage, or maintenance, we are here to assist you.

5.4. Competitive Pricing and Fast Shipping

Does CARDIAGTECH.BIZ offer competitive prices and efficient delivery? We offer competitive pricing on all our tools and equipment, ensuring you get the best value for your money. We also provide fast and reliable shipping, so you can get the tools you need quickly and get back to work.

5.5. Customer Satisfaction Guarantee

What if you are not satisfied with your purchase from CARDIAGTECH.BIZ? We stand behind the quality of our products and are committed to customer satisfaction. If you are not completely satisfied with your purchase, simply contact us, and we will do everything we can to make it right.

6. Maintaining Your Mercedes Ball Joints

How can you extend the life of your Mercedes ball joints and prevent premature wear? Proper maintenance is key to extending the life of your Mercedes ball joints and preventing premature wear. Here are some tips to help you keep your ball joints in good condition:

6.1. Regular Inspections

How often should you inspect your ball joints? Inspect your ball joints regularly for signs of wear, such as torn or cracked rubber boots, excessive play, or unusual noises. Aim to inspect them at least every 6 months or during your regular vehicle maintenance.

6.2. Proper Lubrication

Why is lubrication important for ball joint maintenance? Ensure your ball joints are properly lubricated. Some ball joints have grease fittings that allow you to add grease using a grease gun. If your ball joints do not have grease fittings, consider replacing them with ones that do for easier maintenance.

6.3. Avoid Harsh Driving Conditions

Can driving habits affect the lifespan of ball joints? Avoid harsh driving conditions that can put excessive stress on your ball joints, such as driving over potholes, speed bumps, or rough terrain at high speeds.

6.4. Promptly Address Suspension Issues

What other suspension problems can affect ball joint wear? Address any suspension issues promptly. Problems such as worn shocks, struts, or control arm bushings can put additional stress on your ball joints, leading to premature wear.

6.5. Professional Maintenance

When should you seek professional maintenance for your suspension system? Consider having your suspension system professionally inspected and serviced at least once a year. A qualified mechanic can identify potential issues and perform necessary maintenance to keep your suspension system in good condition.

7. Understanding the Costs Involved

What are the typical costs associated with replacing ball joints on a Mercedes? Understanding the costs involved in replacing ball joints can help you budget for this essential maintenance task. The costs can vary depending on several factors, including the cost of parts, labor, and any additional services required.

7.1. Cost of Replacement Ball Joints

How much do replacement ball joints typically cost for a Mercedes? The cost of replacement ball joints for a Mercedes can vary depending on the brand, quality, and where you purchase them. Generally, you can expect to pay between $50 and $200 per ball joint. High-quality or OEM (Original Equipment Manufacturer) ball joints may cost more.

7.2. Labor Costs

How much do mechanics typically charge for ball joint replacement labor? Labor costs for ball joint replacement can vary depending on the mechanic’s hourly rate and the complexity of the job. On average, you can expect to pay between $150 and $400 in labor costs per ball joint. Some mechanics may charge a flat rate for the job.

7.3. Additional Costs

What other costs might be associated with ball joint replacement? In addition to the cost of parts and labor, there may be some additional costs associated with ball joint replacement:

Wheel Alignment: As mentioned earlier, it is a good idea to get a wheel alignment after replacing ball joints, which can cost between $75 and $200.
Related Repairs: During the ball joint replacement, the mechanic may identify other worn or damaged suspension components that need to be replaced, such as control arms, tie rod ends, or bushings.
Taxes and Fees: Don’t forget to factor in any applicable taxes and fees.

7.4. DIY vs. Professional Replacement

Is it more cost-effective to replace ball joints yourself or hire a professional mechanic? Whether it is more cost-effective to replace ball joints yourself or hire a professional mechanic depends on your skills, experience, and the tools you have available.

DIY Replacement: Replacing ball joints yourself can save you money on labor costs. However, you will need to invest in the necessary tools and have the knowledge and skills to perform the job correctly.
Professional Replacement: Hiring a professional mechanic will cost more, but you can be confident that the job will be done correctly and safely. Mechanics also have access to specialized tools and equipment that you may not have.

Carefully weigh the pros and cons of each option before making a decision. If you are not comfortable working on your vehicle’s suspension system, it is best to hire a professional mechanic.

8. Ensuring Safety After Replacement

What steps should you take to ensure your Mercedes is safe to drive after replacing the ball joints? After replacing the ball joints on your Mercedes, it is essential to take steps to ensure that the vehicle is safe to drive. These steps include performing a thorough inspection, test driving the vehicle, and getting a wheel alignment.

8.1. Post-Replacement Inspection

What should you inspect after completing the ball joint replacement?

Check All Connections: Double-check all nuts, bolts, and connections to ensure they are properly tightened.
Inspect Brake Lines: Ensure the brake lines are not twisted or damaged.
Grease Fittings: If your ball joint has grease fittings, grease them thoroughly.
Check for Leaks: Inspect for any fluid leaks around the ball joints or brake lines.

8.2. Test Drive

What should you listen and feel for during the test drive? Take the vehicle for a test drive to check for any unusual noises, vibrations, or steering issues. Pay attention to how the vehicle handles and brakes.

8.3. Wheel Alignment

Why is a wheel alignment important after ball joint replacement? Get a wheel alignment after replacing ball joints to ensure optimal handling and tire wear. A proper wheel alignment will ensure that your tires are properly aligned with the road, reducing wear and improving fuel efficiency.

8.4. Professional Inspection

When should you have a professional mechanic inspect your work? If you are not confident in your ability to perform the ball joint replacement correctly, or if you experience any issues during the test drive, consider having a professional mechanic inspect your work.

9. Frequently Asked Questions (FAQ)

Have questions about ball joint replacement on your Mercedes? Here are some frequently asked questions to help you better understand the process:

9.1. How Long Does It Take to Replace Ball Joints on a Mercedes?

How much time should you allocate for this repair task? The time it takes to replace ball joints on a Mercedes can vary depending on your experience, the tools you have available, and the condition of the vehicle. On average, it can take between 2 and 4 hours to replace both ball joints.

9.2. Can I Replace Ball Joints Myself, or Should I Hire a Professional Mechanic?

What factors should you consider when deciding whether to DIY or hire a pro? Whether you can replace ball joints yourself depends on your skills, experience, and the tools you have available. If you are comfortable working on your vehicle’s suspension system and have the necessary tools, you may be able to do it yourself. However, if you are not confident in your ability, it is best to hire a professional mechanic.

9.3. What Are the Symptoms of Bad Ball Joints?

What are the key indicators that your ball joints need replacement? Common symptoms of bad ball joints include clunking noises, steering issues, uneven tire wear, and vibrations.

9.4. How Often Should Ball Joints Be Replaced?

Is there a recommended replacement interval for ball joints? There is no specific replacement interval for ball joints. However, they should be inspected regularly and replaced when they show signs of wear or damage.

9.5. Can Bad Ball Joints Cause Other Problems?

What other vehicle components can be affected by worn ball joints? Yes, bad ball joints can cause other problems, such as uneven tire wear, steering instability, and suspension failure.

9.6. What Is a Ball Joint Extractor, and Why Is It Important?

Why is this tool essential for safe and efficient ball joint removal? A ball joint extractor is a specialized tool used to safely and easily separate the ball joint from the steering knuckle or control arm. It is important because it minimizes the risk of damaging other suspension components.

9.7. What Is the Difference Between Upper and Lower Ball Joints?

How do these two types of ball joints differ in function and location? Upper ball joints connect the upper control arms to the steering knuckle, while lower ball joints connect the lower control arms to the steering knuckle. Lower ball joints generally bear more load and stress due to their position.

9.8. What Torque Specifications Should I Use When Tightening Ball Joint Nuts and Bolts?

Where can you find the correct torque specs for your specific Mercedes model? Refer to your Mercedes service manual for the correct torque specifications for tightening ball joint nuts and bolts.

9.9. Is Wheel Alignment Necessary After Ball Joint Replacement?

Why is a wheel alignment recommended, even if not strictly required? Yes, it is a good idea to get a wheel alignment after replacing ball joints to ensure optimal handling and tire wear.

9.10. Where Can I Purchase High-Quality Ball Joints and Tools for My Mercedes?

Where can you find reliable and compatible parts and tools for your Mercedes? You can purchase high-quality ball joints and tools for your Mercedes from CARDIAGTECH.BIZ. We offer a wide selection of tools and parts specifically designed for Mercedes vehicles.

10. Why Contact CARDIAGTECH.BIZ Today

Ready to tackle your Mercedes ball joint replacement with confidence? Don’t let worn ball joints compromise your Mercedes’ handling and safety. At CARDIAGTECH.BIZ, we provide the tools and expertise you need to get the job done right. Our wide selection of high-quality tools, including Mercedes-specific ball joint extractors, ensures compatibility and ease of use. According to a recent survey by Consumer Reports, using the right tools can reduce repair time by up to 50% and minimize the risk of damage.

Don’t wait until worn ball joints lead to more extensive and costly repairs. Contact CARDIAGTECH.BIZ today for expert advice and support. Our team of experienced professionals can help you select the right tools for your specific Mercedes model and provide guidance on proper usage and maintenance.

Visit our website at CARDIAGTECH.BIZ or call us at +1 (641) 206-8880 to speak with a knowledgeable representative. You can also visit our store at 276 Reock St, City of Orange, NJ 07050, United States. Let CARDIAGTECH.BIZ be your trusted partner in keeping your Mercedes running smoothly and safely. We are committed to your satisfaction and offer competitive pricing and fast shipping. Upgrade your tool collection today and experience the difference that quality and expertise can make.